Servo motor oil and water protection: 1. Servo motors can be used in places that are susceptible to water or oil droplets, but they are not fully waterproof or oil resistant. Therefore, servo motors should not be placed or used in environments with water or oil invasion. 2. If the servo motor is connected to a reduction gear, an oil seal should be added when using the servo motor

Why is servo motor not suitable for light load operation? When the servo motor operates under light load, it will cause the following effects: 1) low power factor of the motor; 2) Low motor efficiency. It will cause equipment waste and uneconomical operation.

What work needs to be done before starting the servo motor? Before starting the servo motor, the following checks need to be done: 1) Measure the insulation resistance (for low voltage motors, it should not be less than 0.5M Ω); 2) Measure the power supply voltage. Check if the motor wiring is correct and if the power supply voltage meets the requirements; 3) Check whether the starting equipment is in good condition (official account: pump manager); 4)

n automatic control systems, servo motors are used as executive components. They require a wide range of speed regulation, linear mechanical and regulatory characteristics, and no "self rotation" phenomenon for their performance - they can immediately stop rotating and respond quickly when the control voltage is zero.

What are the reasons for the low insulation resistance of servo motors?

After selecting the mechanical transmission scheme, it is necessary to select and confirm the model and size of the servo motor. (1) Selection criteria - In general, selecting a servo motor requires the following conditions: